Multiple Spindle Drill Press Hole Tapping Now Possible
Many CNC punching operations also require that the holes be tapped afterwards. Most punch press machines available are not capable of performing a tapping operation. These tapping operations are generally performed on a drill press as a secondary operation.
This is a single hole at a time process and is very time and resource intensive.
AutoDrill can now supply a multiple spindle tapping accessory to greatly increase the speed of tapping on a drill press, or similar available equipment. AutoDrill can now supply multiple spindle heads and a special fixture set-up to tap more than one hole simultaneously. Some customers are performing a multi-hole tap process on as many as ten holes at a time using this method.
AutoDrill provides free advice on the customer's existing equipment's capacity to tap multiple holes at one time. If upgrades to the
drill press and/or additional equipment is necessary, AutoDrill provides the best way to improve the tapping operation.
A search for "AutoDrill" on video web sites turns up a number of example videos including a three hole, drill press tapping example video.
A no-obligation quote and/or literature is available from AutoDrill.
For more information, please contact:
AutoDrill
50 Division Avenue
Millington, NJ 07946
Ph: 800-871-5022
Intl: 01.908.542.0244
Fax: 908-542-0242
Intl. 01.908.542.0242
www.Drill-N-Tap.com
Sales@AutoDrill.com
|
|