Send to a Friend "Multiple Spindle Drill Press Hole Tapping Now Possible"
Many CNC punching operations also require that the holes be tapped afterwards. Most punch press machines available are not capable of performing a tapping operation. These tapping operations are generally performed on a drill press as a secondary operation.
You will send the story Multiple Spindle Drill Press Hole Tapping Now Possible to a specified friend:
Many CNC punching operations also require that the holes be tapped afterwards. Most punch press machines available are not capable of performing a tapping operation. These tapping operations are generally performed on a drill press as a secondary operation.
This is a single hole at a time process and is very time and resource intensive.
AutoDrill can now supply a multiple spindle tapping accessory to greatly increase the speed of tapping on a drill press, or similar available equipment. AutoDrill can now supply multiple spindle heads and a special fixture set-up to tap more than one hole simultaneously. Some customers are performing a multi-hole tap process on as many as ten holes at a time using this method.
AutoDrill provides free advice on the customer's existing equipment's capacity to tap multiple holes at one time. If upgrades to the
drill press and/or additional equipment is necessary, AutoDrill provides the best way to improve the tapping operation.
A search for "AutoDrill" on video web sites turns up a number of example videos including a three hole, drill press tapping example video.
A no-obligation quote and/or literature is available from AutoDrill.
For more information, please contact:
AutoDrill
50 Division Avenue
Millington, NJ 07946
Ph: 800-871-5022
Intl: 01.908.542.0244
Fax: 908-542-0242
Intl. 01.908.542.0242
www.Drill-N-Tap.com
Sales@AutoDrill.com
|
|
|
|